maxi m u m ratings t ypical ope r ati o n c lass of t ype of s ervice p late p late p late s creen p late drive output operation voltage c urrent voltage voltage c urrent p ower p ower (volts) ( a mps) (volts) (volts) ( a mps) (watts) (kilowatts) a b1 rf linear amplifer 3,000 0.8 3,000 500 0.8 50 1.7 the 8295A is a radial beam pentode intended for use as a linear amplifer. the anode is forced-air cooled and has a maximum dissipation rating of 1 kilowatt. 8295 a cpi | 4 c w50,000j for information on this and other cpi products, visit our website at: www.cpii.com , or contact: cpi mpp division, eimac operation, 607 hansen way, palo alto, ca 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : powergrid@cpii.com the values listed above represent specifed limits for the product and are subject to change. the data should be used for basic information only. formal, controlled specifcations may be obtained from cpi for use in equipment design. c ha r acte r istics plate dissipation (max.) 1000 watts screen dissipation (max.) 30 watts grid dissipation (max.) 0.5 watt frequency for max. rating (cw) 30 mhz amplifcation factor 3.4 filament/cathode oxide voltage 6.0 volts current 8.2 amps capacitance grounded cathode input 40 pf output 18.5 pf feedthrough 0.09 pf capacitance --- input --- pf output --- pf feedthrough --- pf cooling forced air base special 7-pin air socket sk-184, sk-184a air chimney n/a boiler n/a length 5.05 in; 12.8 cm diameter 4.03 in; 10.2 cm weight 2.8 lb; 1.27 kg cpi | 8295 a
|
